Yaskawa MP2000 Series I/O Module User Manual Bedienungsanleitung Seite 118
- Seite / 139
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
4.5 Electronic Gear Function
4.5.2 Settings
118
When reference unit is 1 μm:
When 50,000 reference pulses are input, the workpiece will be moved by 50,000 × 1 μm = 50 mm.
4. Find the load travel distance for each rotation of the load axis using the reference unit and set this dis-
tance to the counter fixed parameter No. 10 (Travel Distance per Machine Rotation).
•
Calculation Examples
• For a ball screw pitch of 5 mm and a reference unit of 0.001 mm:
(Reference unit)
5. Set the Encoder Gear Ratio and the Machine Gear Ratio in the counter fixed parameters No. 11 and
No.12.
When the encoder axis has rotated m times and the mechanical configuration allows the load axis to rotate n
times, set the following values:
No. 11 (Encoder Gear Ratio) = m rotations
No. 12 (Machine Gear Ratio) = n rotations
Setting range: 1 to 65,535 [rotations]
<Setting Example>
For the configuration shown in the diagram:
Gear ratio = n/m = (3/7) × (4/9) = 4/21
Therefore, set the following values:
No.11 (Encoder Gear Ratio) = 4 (rotations)
No.12 (Machine Gear Ratio) = 21 (rotations)
Ball screw Rotary table Belt + pulley
Load travel distance per load axis rotation
Reference unit
Load travel distance per rotation
of load axis (reference unit)
=
EXAMPLE
5
0.001
------------- 5000=
P
One
rotation
P
Reference unit
=
Load axis
P: Pitch
360°
Reference unit
Load axis
One
rotation
=
Reference unit
Load axis
D: Pulley diameter
D
πD
=
π
D
One
rotation
エンコーダ軸
m回転
7回転
3回転
9回転
4回転
負荷軸
n回転
Encoder axis
m rotations
7 rotations
4 rotations
9 rotations
3 rotations
Load axis n rotations
- USER’S MANUAL 1
- Basic Terms 3
- Related Manuals 4
- Copyrights 4
- Safety Information 5
- General Precautions 6
- Storage and Transportation 7
- Installation 7
- Wiring 8
- Disposal Precautions 9
- ( 1 ) Details of Warranty 10
- Warranty Period 10
- Warranty Scope 10
- ( 3 ) Suitability for Use 11
- ( 4 ) Specifications Change 11
- Contents 12
- Mounting Modules 15
- 1.2.1 Mounting an I/O Module 18
- ( 1 ) Preparation 18
- 1. Connect the I/O Devices 20
- 1.2.2 Removing an I/O Module 21
- ( 2 ) Removing the I/O Module 21
- Projection 22
- 1.3 Self-configuration 23
- Function Module 24
- I/O Size 24
- MPE720 Ver. 6 26
- MPE720 Ver. 5 26
- ( 1 ) Module Details 28
- LIO-01/LIO-02 Module 29
- 2.1.1 Outline of Functions 30
- I/O connector 30
- System bus 30
- 2.1.3 Specifications 31
- Environmental Conditions 32
- 2.2.2 Cable Specifications 35
- 2.2.3 Input Circuits 36
- ±20% (+19.2 to +28.8 V) 36
- 2.2.4 Output Circuit 37
- 2.2.5 Pulse Input Circuit 38
- LIO-01 or LIO-02 Module 52
- 2.4.1 Pulse Counting Modes 53
- 2.4.2 Pulse Count Function 54
- 2.4.4 PI Latch Function 57
- 2.4.5 Axis Type Selection 58
- 2.5 Electronic Gear Function 59
- LIO-04/LIO-05 Module 63
- 3.1.1 Outline of Functions 64
- 3.1.3 Specifications 65
- 3.1.4 LED Indicators 66
- 3.2.2 Cable Specifications 72
- 3.2.3 Input Circuit 73
- 3.2.4 Output Circuit 74
- Window 82
- 4.1 Outline of LIO-06 Module 86
- 4.1.3 Specifications 87
- 4.1.4 LED Indicators 88
- 4.2.2 Cable Specifications 92
- 4.2.3 Digital Input Circuits 93
- 4.2.4 Digital Output Circuit 94
- 4.2.5 Analog Input Circuit 95
- 4.2.6 Analog Output Circuit 95
- 4.2.7 Pulse Input Circuit 96
- 4.3 LIO-06 Module Details 100
- 4.3.1 MIXIO Configuration 100
- LIO-06 Module 101
- ( 1 ) Input Offset/Gain 101
- ( 2 ) Output Offset/Gain 101
- ( 2 ) Counter Module Window 104
- Counter Fixed Parameters 105
- ( 4 ) I/O Data Settings 106
- [ b ] In (Input) Data Details 107
- 4.4.1 Pulse Counting Modes 111
- 4.4.2 Pulse Count Function 112
- +4) match 114
- 4.4.4 PI Latch Function 115
- 4.4.5 Axis Type Selection 116
- 4.5 Electronic Gear Function 117
- ------------- 5000= 118
- ( 1 ) Example A: Ball Screw 119
- DO-01 Module 121
- 5.1 Outline of DO-01 Module 122
- 5.1.3 Specifications 123
- ( 1 ) Hardware Specifications 123
- ±20% (+19.2 V to +28.8 V) 123
- 5.1.4 LED Indicators 124
- ( 1 ) Connector Model 125
- CN1 Connector Details 126
- CN2 Connector Details 127
- 5.2.2 Cable Specifications 128
- 5.2.3 Output Circuit 129
- ( 1 ) CN1 Connector 130
- Inductive 131
- ( 2 ) CN2 Connector 132
- 5.3 DO-01 Module Details 134
- Revision History 138
Verwandte Produkte und Handbücher für Ausrüstung Yaskawa MP2000 Series I/O Module User Manual
Ausrüstung Yaskawa MP2000 Series: Built-in SVB or SVB-01 Motion Modul Bedienungsanleitung
(140 Seiten)
(140 Seiten)
Ausrüstung Yaskawa L1000E AC Drive Technical Manual for CIMR-LE Model Bedienungsanleitung
(488 Seiten)
(488 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.050 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern