YASKAWA FSP Series Installationsanleitung PDF herunterladen (Seite 21)

FSP Amplifier Short Form Installation Guide Installation

4. Installation

The FSP Amplifier is a base-mount type servo controller. Incorrect installation will

cause problems. Always observe the installation instructions provided below.

4.1. Operating Conditions

Ensure the following operating conditions for the FSP Amplifier use:

Installation category (Overvoltage category)*: II

Pollution degree

: 2

Protection class

: 1X

Maximum altitude: 1000 m

Conforming to the following standards:

EN55011: 1198 Group 1 Class A

EN61000-6-2: 1999

4.2. Installation Sites

For installation sites, use proper care with the following notes.

Situation Notes on Installation

When installed inside a

control panel

• Design the control panel size, unit layout, and cooling method

so that temperature around the periphery of the FSP Amplifier

does not exceed 55

• When installing multiple FSP Amplifiers side by side in a

control panel, install cooling fans and provide sufficient space

around each FSP Amplifier to allow cooling by fan and natural

convection.

When installed near a

heating unit

Suppress radiated heat from the heating unit and temperature rise

caused by convection so that the temperature around the

periphery of the FSP Amplifier does not exceeds 55

When installed near a

vibration source

Install a vibration isolator underneath the FSP Amplifier to

prevent it from receiving vibration.

When installed in a

corrosive gases area

Corrosive gases do not immediately affect the FSP Amplifier but

will eventually cause contactor-related devices to malfunction.

Take appropriate action to protect against corrosive gases.

Others

• Avoid installation in a hot and humid place or where excessive

dust or iron powder is present in the air.

• Be sure there is no condensation or freezing.

• Keep the ambient temperature 45

C or less to ensure long-term

reliability.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 57 58

Kommentare zu diesen Handbüchern

Keine Kommentare

YASKAWA FSP Series Installationsanleitung Seite 21

Kommentare zu diesen Handbüchern