Yaskawa Ladder Works Programming Manual Bedienungsanleitung PDF herunterladen (Seite 37)

2.12 ADD TIME Instruction (TMADD)

2-20

2.12 ADD TIME Instruction (TMADD)

[Outline]

The TMADD instruction adds one time (hours/minutes/seconds) to another time. The Source is added

to the Dest and the result is stored in the Dest. The formats of Source and Dest are as follows.

Data Format

0 Hours/minutes Upper byte (hours) : 0 to 23

Lower byte (minutes) : 0 to 59

1 Seconds

0000

～

0059

If the contents of the Dest and Source and the operation result are with the appropriate ranges, the

operation will be performed normally. After the operation is completed, the [Status] is turned OFF. If

the contents of the Dest and Source are outside the data ranges, the operation is not performed. In this

case, 9999H is stored in the column "second" of the Dest, and the [Status] is turned ON.

[Format]

Symbol : TMADD

Full Name : Time Add

Category : MATH

Icon :

[Parameter]

Parameter Name Setting

Source · Any integer type register

· Any integer type register with subscript

Dest · Any integer type register (except for # and C register)

· Any integer type register with subscript (except for # and C register)

[Status] · Any bit type register (except for # and C register)

· Any bit type register with subscript (except for # and C register)

* possible to omit

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 219 220

Keine Kommentare

Yaskawa Ladder Works Programming Manual Bedienungsanleitung Seite 37