YASKAWA NX100 Betreibershandbuch PDF herunterladen (Seite 37)

11 CUTTING, COPYING AND PASTING LINES

11.1 Cutting a Ladder Diagram Line

Cut the line selected in the “ladder preview” display. The ladder information of the

cut line can be pasted to another line by pressing [Paste Rung] or [Insert Cut/Copied

Rung].

[How to Operate]

Select the line to be cut in the “ladder preview” display, and select [Edit] –

[Cut Rung]. Or select

from the main tool bar (refer to “26.2.1 Main Tool

Bar”).

To select several lines simultaneously, hold down the [SHIFT] or [CTRL] key

when selecting lines.

11.2 Copy a Ladder Diagram Line

Copy the line selected in the “ladder preview” display. The ladder information of the

copied line can be pasted onto another line by pressing [Paste Rung] or [Insert

Cut/Copied Rung].

[How to Operate]

Select the line to be copied in the “ladder preview” display. Then select [Edit]

– [Copy Rung] menu. Or select

from the main tool bar (refer to “26.2.1

Main Tool Bar”).

To select several lines simultaneously, hold down the [SHIFT] or [CTRL] key

when selecting lines.

11.3 Pasting a Ladder Diagram Line

Paste the cut or copied contents of the line by pressing [Cut Rung] or [Copy Rung]

over the line selected in the “ladder preview” display.

When several ladder list files are open simultaneously, the ladder diagram can be

pasted onto another ladder list file.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 90 91

Keine Kommentare

YASKAWA NX100 Betreibershandbuch Seite 37