YASKAWA A1000 - Spezifikationen PDF herunterladen (Seite 18)

18

YASKAWA A1000

Content

Options

Name Purpose Model

Input Noise Filter

Reduces noise from the line that enters into the drive input power system. Should be installed as close as possible to the drive.

400V class: Filter of the manufacturer Block are used. Class C1 and footmounting up to 15 kW (HD), Class C2 and side mounting up to 110 kW (HD)

4A0002

AA

FB-40008A

4A0004

AA

4A0005

AA

4A0007

AA

4A0009

AA

FB-40014A

4A0011

AA

4A0018

AA

FB-40025A

4A0023

AA

4A0031

AA

FB-40044A

4A0038

AA

4A0044

AA

FB-40060A

4A0058

AA

4A0072

AA

FB-40072A

4A0088

AA

FB-40105A

4A0103

AA

4A0139

AA

FB-40170A

4A0165

AA

4A0208

AA

FB-40250A

4A0250

AA

AC Chokes

Reducing Harmonics

B06040 Series

Analog input

Enables high-precision and high-resolution analog speed reference setting.

• Input signal level: -10 to +10 Vdc (20 kΩ) 4 to 20 mA (500 Ω)

• Input channels: 3 channels, DIP switch for input voltage/input current selection

• Input resolution: Input voltage 13 bit signed (1/8192) Input current 1/6554

AI-A3

Digital Input

Enables 16-bit digital speed reference setting.

• Input signal: 16 bit binary, 2 digit BCD + sign signal + set signal

• Input voltage: +24 V (isolated)

• Input current: 8 mA

Selectable Parameter: 8 bit, 12 bit, 16 bit

DI-A3

DeviceNet

communications interface

Used for running or stopping the drive, setting or referencing parameters and monitoring output frequency, output current, or similar items through

DeviceNet communication with the host controller

SI-N3

CC-Link

communications interface

Used for running or stopping the drive, setting or referencing parameters and monitoring output frequency, output current, or similar items through

CC-Link communication with the host controller.

SI-C3

CANopen

communications interface

Used for running or stopping the drive, setting or referencing parameters and monitoring output frequency, output current, or similar items through

CANopen communication with the host controller.

SI-S3

MECHATROLINK

communications interface

Used for running or stopping the drive, setting or referencing parameters and monitoring output frequency, output current, or similar items through

MECHATROLINK communication with the host controller.

SI-T3

PROFIBUS-DP

communications interface

Used for running or stopping the drive, setting or referencing parameters and monitoring output frequency, output current, or similar items through

CANopen communication with the host controller.

SI-P3

Analog monitor

Outputs analog signal for monitoring drive output state (output freq., output current etc.)

• Output resolution: 11 bit signed (1/2048)

• Output voltage: −10 to +10 Vdc (non-isolated)

• Output channels: 2 channels

AO-A3

Digital output

Outputs isolated type digital signal for monitoring drive run state (alarm signal, zero speed detection, etc.).

Output channel: Photo coupler 6 channels (48 V, 50 mA or less) Relay contact output 2 channels 250 Vac, 1 A or less 30 Vdc, 1 A or less

DO-A3

Open collector PG

interface

For control modes requiring a PG encoder for motor feedback.

• Phase A, B, and Z pulse inputs (complementary type)

• PG frequency range: Approx. 50 kHz max.

• Pulse monitor output: Open collector, max. voltage: 24 V, max. current 30 mA

• Power supply output for PG: +12 V, max. current 200 mA

PG-B3

Line Driver PG

interface

For control modes requiring a PG encoder for motor feedback.

• Phase A, B, and Z pulse (differential pulse) inputs (RS-422)

• PG frequency range: up to 300 kHz (approx.)

• Pulse monitor output: RS-422

• Power supply output for PG: +5 V or +12 V, max. current 200 mA

PG-X3

LED Operator

Easy long distance reading

JVOP-182

Braking Resistor

Used to shorten the deceleration time by dissipating regenerative energy through a resistor. (3% ED) (all models up to 3,7 kW)

ERF-150WJ series

Braking Chopper Unit

Shortened deceleration time results when used with a Braking Transistor Unit.

CDBR series

24 V Power Supply

Provides power supply for the control circuit and option boards. Note: Parameter settings cannot be changed when the drive is operating solely from

this power supply.

PS-A10H

PS-A10L

USB Copy Unit

(RJ-45/USB compatible plug)

• Adapter for connecting the drive to the USB port of a PC

• Can copy parameter settings easily and quickly to be later transferred to another drive.

JVOP-181

LCD operator extension cable

Cable for connecting the LCD operator.

WV001: 1 m

WV003: 3 m

Note: contact the manufacturer in question for availability and speci

ﬁ

cations of non-YASKAWA products.

1 2 ... 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare